Happy Thanksgiving

 I’m creating this post on my phone using the voice feature. we’ll see how this goes. my modem died today; it’s been a slow death for several months. I spent a good part of the afternoon first on the phone trying to get a new one ordered and then on the chat from my iPhone, so it’s been a challenging afternoon.  I want to wish everyone a happy Thanksgiving holiday and hope that you are able to spend good time with your families. 

Last summer I decided to re-create my grandmothers Thanksgiving dinnerThanksgiving dinner. The plan was to make a room box to re-create her dining room I just haven’t gotten around that yet. I made all the food using oven bake polymer clay and probably blogged about it sometime ago when I created the turkey, the stuffing, the mashed potatoes, the pies, and the dressing.  the table is inspired by my grandmothers Thanksgiving table using her Montgomery ward currier and Ives red dishes. I found the dishes on replacements.com where I was able to capture an image and sized it in Microsoft Word and print it on water slides to create a replica of grandma‘s table.  the setting is in the blue farmhouse now pink and is a reminder every time I look at the scene of a wonderful childhood celebration with the whole family.

Happy Thanksgiving to my American friends wishing you a wonderful celebrations into those abroad we send our Thanksgiving blessings to you as well thank you for joining me see you soon .

All Over the Place

I seem to be all over the place these days, going from one project to another. I've ordered over a hundred photos for five 8x8 photo albums for the grandkids--such drama came from deciding which of thousands of photos to chose from. lost photos at the drugstore print shop, and the complications using discontinued Creative Memories products that fortunately I can order on eBay. Still! I doubt that I'll have them done by Christmas.

Three years ago I got the brilliant idea to make greeting cards for the veterans at the Cheyenne, WY VA nursing home, and I've grown our Daughters of the Revolution project from sending 22 two cards the veterans to sending hand made greeting cards to Cards for Soldiers, so we make a lot of cards here in my basement. I fix lunch for my DAR friends and we work for a few hours creating pretty cards for our service men and women. It's such a small gesture, but a worthy one. We will gather here Friday, so I have plenty to do to get ready.

This time of year with the holidays approaching, I won't get much done on the Manchester, and there is so much to do. I am having a very hard time committing to anything permanent, such as flooring, which I've been working on. I've made decent progress, but returning from my hiatus caused by health issues I had lost track of what the original plan was, made a of mess of things. Instead of finishing floors, last week I made furniture for the living room and curtain rod hangers--now that project came out of nowhere since I'm no where near ready for curtain rods, but I have the hangers!

So let's begin with the Mid Center Modern chair created by Dilly Dally Dollhouse. I downloaded the .svg files from Etsy and went to work. I won't go through the entire tutorial because she does a much better video. While she used a double layer of 1/16 basswood, I used 1.5 mm chipboard, which is the same thickness. 

Here's the irony of this choice for the Manchester living room: 

I never have been a fan of Mid-Century Modern. When I set out on this build, I knew that it had to be different from the other two farm houses that I've created.

 My grandmother's house, a two story red brick Tutor, was the typical 1940s home. Perfect in every detail, clean and neat. Never anything out place.  I can remember every nook, cranny, and corner. Every detail. I was 12 when my grandmother died suddenly. We were great companions and she taught me so much and missed her, but when my grandfather sold their house, dispersed her belongings, and remarried, I was happy for him. He moved just down the road from us, which a great, too.  His new wife had a nice home to decorate. In the early '60 the Swedish style was 'in' and she chose, including the aluminum foil Christmas tree with the color wheel. I hated it. Google the look and you will see that it is still made.

 I remember the turquoise cushions on chairs just like these little ones Rita at Dilly Dally Dollhouse has created. For me, the furnishings didn't look inviting, warm, or comfortable. How ironic that I am now jumping out of my comfort zone for this house.

As my photo shows, I also cut out a sofa by tripling the the back and seat pieces in the Maker Design Space by simply attaching 3 pieces. Worked out for me. It is a good idea to label pieces since the front and back have a slight difference in dimensions. 

                                       

                             

Rita at Dilly Dally has created such easy projects that lend good results. So here's how I assembled my chair and sofa. I used double stick carpet tape and it is sticky to adhere the fabric to the card that I used for the cushions.. Rita just uses the glue stick, which I used for the corners and realized it does adhere fabric nicely.                                         

I glued the poly fiber to heave card using the glue stick. Poly fiber cut to fit.

                         

For the sofa, I used double stick--really sticky--carpet tape and then the glue stick to adhere the fabric on the ends, which dries clear, by the way and doesn't saturate the fabric as tacky glue or even fabric glue do. As it turned out, I probably didn't need the sticky tape for the glue held nicely.                     

Since these were my practice pieces, I just folded the fabric around card instead of making boxes cushions using the foam core board, which didn't require the last step to finished the edges or the sides of the cushions. A finished box cushion will have a band around the edges. 

With the chipboard board pieces finished--I didn't paint them--, I cut the wood ones from 3/32" bass wood. Cricut does not say that the Maker will cut that thickness, so I'd say: at your own risk. Mine seems to handle it nicely and while it says 24 rounds, 11 or 12 passes seem to work fine. 

I am a bit disappointed that the wood grain on the chair doesn't match, but who will notice once the cushion is installed. For this set, I will use the 3/8" foam core to make box cushions for more tailored look and use using quilt batting to add softness instead of the poly fiber. Right now I can't decide on fabric or colors and I have to decide on wallpaper for the living room. 

  

The practice pieces have been moved into the Bellingham Texas Farm House. The chair will be in the little cowboy's room that is influenced by Roy Rogers, King of the Cowboys. I need to get his poster hung.

The sofa is in the second story sitting room. I wanted it to be somewhat southwest, but the rug doesn't really fit.

So I borrowed the cow hide rug from the living room then ordered a new one from Etsy for the upstairs.

Curtain Rods

Sometimes it really is easier to just order things from the miniature venders online, but I've always made my own curtain rods using jewelry findings and wooden skewers, but this time I used WireForm soft metal rods that I purchased from Hobby Lobby. The ones shown here are .06 12" long rods, but actual one that I used is larger. Can't say Houseworks much since I don't have the packaging anymore, but the smaller diameter will work.

Supplies:

• Rod: either wooden skewer or metal
• Bead caps--whatever you want. I'm using brad since the tube is hallow. 
• Findings. Shop the bead section in the craft store
• Glue: jewelry glue or E6000 works great to adhere metals.
• jewelry wire: a fine gage. Once again I'm using from my stash so I've thrown away package. This could be 22 gage. Larger gage is harder to twist and work with and you need something that will o through the beads and finding.
• jewelry cutters and pliers
• Pipe cutter--the red thing. You can't cut with scissors. This is an inexpensive gadget if you are going to work with wire.

I'll include my photos, but they are not very good and it is very hard to describe how bend the wire to create the hook. Essentially I created a loop at one end of about 22 gage wire using jewelry pliers. I inserted into a bead cap so that the loop is located on the concave side of the cap with 90 degree in it. 

This is what you want the finished under side of the finding to look like (the concave side). Once you have created the loop and cut the wire about 4 mm long, you will make a 90 degree downward bend about 2 mm from the bead cap.

Begin by creating a loop

The loop doesn't have to be closed.

 

Bend the loop down to create right angle.

Thread the straight end of the wire through the top of the finding

From the front side, bend another right angle down about 2 mm from the finding. On the other side of the right angle wrap the wire around the plier to create half a loop and cut the excess wire off. This very hard to explain and even harder to get good photos.

You should end up with hangers that look something like this. Some hooks are a little long, so I'll trim the excess away when I mount the rod.

Here is the finished curtain rod hanger. I glued the hooks in place then used these clamps to hold the pieces in place and let them set over night.

Next I need to source lights. I'm trying to use out my stash, I don't have all the light that I need I have searched for a bathroom wall fixture, but haven't found exactly what I want yet. In order to more interior work, I need to install the tape wiring, so perhaps that will be next.

Thanks for visiting today. I always enjoy reading your comments. 

 

Building a Shower

From the beginning, I had in mind a sleek, modern bathroom for the Manchester. Some time ago I ordered this porcelain shower base from Elf Miniatures in the UK, certain to use in my next house. However, it's too big for the space dedicated to the shower unit. Once I add the window casing, this shower won't work.

            

I started out with these materials: 1/4 inch foam board for the walls, teal foil scrapbook paper for the scale tile, paper octagon flooring that I purchased from Michaels--cool stuff, but no longer in stock, 1mm acetate from Hobby Lobby. As I worked through the design, I used Cricut brand 2mm chipboard to cut the rim for the shower base. I tried cutting the rim for the foam board, but just could not get smooth, even cuts.

My first attempt to cut the walls was a big fail because I used hot glue to adhere the pieces, but hot glue is too hard to dispense and control. I recut the entire shower and glued the walls together Aleene's Tacky glue with much better results. I cut the shoer base, but foam board just didn't give the results that I wanted. I cut tow pieces and glued them together to get the height of the porcelain base

I needed to find a way to cover the base with the octagon tile with rather sad results, so I decided  to create rim that would fit on top of the shower base to give it depth and shape. Foam board is really hard to cut straight. I'm getting better at cutting it, but it still isn't the perfect material.

The shower base looks messy. The paper tile didn't fold neatly when I tried to cover the two base pieces glued together and the base is flat. It needs sides or something to give it depth. Water would just spill out, so I had to create some sort of rim or lip, and I needed a better material to cut the base from. I measured my shower base then cut a piece of scrapbook paper on the Cricut to create a template for the top of shower base and  for a perfect fit. Now I was on a roll.

I wanted to match the thickness of the porcelain shower base, which two layers of foam board created, but base was flat,  so I dug in my wood stash and found this piece of balsa wood and cut it to fit the my rim template to create new shower base, but it still needed a lip or bit of wall to give the base depth and to hold water.

I realized that I could create that rim using chipboard. I didn't need the rim to be very thick because the balsa had the thickness. The great thing about Design Space is that I can create exact measurements to the mm and I can get clean, accurate cuts.

I loaded my scrap of chipboard and cut three rims for a nice, thick shower rim that would fit on top of the wood base, giving it depth and preventing the water from spilling out on the floor. 

It ain't pretty, but the scrap had enough space to cut my 3 pieces.

Three 2mm rims were too thick, so I  glued 2  together.

I cut the tile paper on the Cricut to get perfect fitting pieces to cover the shower base.

I painted the chipboard rim white and glued  it to the balsa wood base then I used wallpaper paste to adhere the paper tile to the shower base. 

And there it is, a new shower base. I would still prefer  the porcelain base, but this one will do just fine. 

While the glue set, I painted my fixtures using Testor's model enamel paint. I ordered the fixtures for Shapeway's Marketplace from a vendor Paper Doll Miniatures. (Her blog) She is very sweet. After I received my order, I messaged her for suggestions on how to paint the 3-D printed bathroom fixtures and received the sweetest reply.

I'm painting them antique gold. One bathroom in our old house, a custom built house, had gold faucets in a bathroom. I loved the elegance of the gold, which seems to be making some what of a return in more modern bathrooms. 

The shower will have one "glass" pane made from acetate. I cut my acetate on the my paper trimmer, making one pass to score the acetate rather than cut it. I do not remove the protective cellophane covering both sides to prevent scratching the acetate and the blade slides over it more easily. The acetate will snap apart easily along the scored line. 

I used bead and glass glue to adhere the acetate to the thin edge of the shower wall for a clean, modern look. Attaching glass shower panels can be quite a challenge and I would have had to order some channel moulding to have working shower doors, but as I searched for shower design I discovered that some showers have minimal surrounds, some only have one glass panel. Good enough for me. I hate cleaning shower glass, anyway. (That's why when we remodeled our own master bath, I opted for a shower curtain rather than a large glass shower door that I knew I'd never be able to keep clean.)

I'm letting the shower rest tonight to give the adhesives time to cure. There is more to do in the bathroom before the final install, but this major project is almost done. Tomorrow I'll install the shower head.  

And that's what I did today. Actually, I started the project yesterday. Making the shower was big project. I wasn't sure that I'd be able to get the materials that I chose to work. I created quite a scrap pile of failure, but once I decided to use the Cricut to make the more difficult cuts, I was home free. 

Thanks for joining me.